Oscilloscopes

One of the most important types of test equipment used in troubleshooting, an oscilloscope ("scope") is a test equipment that provides a visible graphical display of the waveform being measured. It can be used to measure peak-to-peak voltage, frequency, time periods, wave slopes, phase angles and frequency response. Most oscilloscopes have dual-trace capabilities and storage feature. 

Alexan oscilloscopes offer a wide selection of analog and digital storage, bandwidth, and additional features such as Component Tester, advanced triggering and Fast Fourier Transform (FTT) math function.
DS1000CA Series Digital Oscilloscopes

View larger image

View Specifications

The DS1000CA Series Digital Oscilloscopes set a new standard for technology and capability. With features including 2GSa/s sample rate, FFTs, record and replay, roll mode, alternate trigger mode, adjustable trigger sensitivity, and PictBridge printing the DS1000CA is the new bench standard.


Features:
  • 2 Analog channels plus external trigger
  • Up to 300MHz bandwidth
  • 2GSa/s real-time sample rate and 50GSa/s equivalent-time sample rate
  • p to 2000wfms.s waveform update rate
  • 5.7" TFT QVGA (320x240) with 64K color LCD backlit display
  • Trigger modes: edge, pulse width, slope, video, pattern, continuous time, and alternate
 
TDS-2012 Tektronix 2-Channel 100MHz Digital Storage Oscilloscope

View larger image

 The TDS-2012 digital storage oscilloscopes delivers an unbeatable combination of superior performance, unmatched ease-of-use and affordability in an ultra lightweight, portable package. TDS-2012 color LCD display dedicates a different color for each trace and its associated readouts, enabling easy identification between the traces and readouts for each channel.

With up to 100MHz bandwidth and 1GS/s maximum sample rate, the TDS-2012 oscilloscope provide accurate real-time acquisition up to its full bandwidth. This instrument offers advanced triggering, such as pulse width triggering, and 11 standard automatic measurements. The Fast Fourier Transform (FFT) math function allows the user to analyze, characterize and troubleshoot circuits by viewing frequency and signal strength.

SPECIFICATIONS:
  • 100MHz Bandwidth
  • Sample Rates up to 1GS/s
  • 2 Channels
  • Color LCD Display
  • Autoset Menu with Waveform Selection
  • Probe Check Wizard To Ensure Correct Probe Usage
  • Context-sensitive Help
  • Dual Time Base
  • Advanced Triggering
  • 11 Automatic Measurements
  • Multi-language User Interface
  • Waveform and Setup Memories
  • FFT Standard

 

 

 
 
DS1000E/D Series Digital Oscilloscopes



View Specifications

Features:

  • A true mixed signal oscilloscope with 16 channel Logic Analyzer (DS1000D)
  • 1 GSa/s maximum Real-time Sample Rate and 1 Mpts of memory depth
  • Bandwidth options: 50MHz and 100MHz
  • Extensive set of trigger modes including: Edge, Video, Pulse Width, Slope, Alternate
  • 64 k TFT Color LCD, bright and vivid waveform display
  • Direct print to PictBridge compatible printers via USB Device interface
  • Compact design to save your desktop space

 
 
AS-40M/FS-409 40MHz Multifunction Oscilloscope

View larger image

A 40MHz analog oscilloscope built-in with a 5MHz function generator, and a 50MHz auto-range, auto-gatetime counter. Its function generator and counter can be operated independently or jointly.


SPECIFICATIONS:
  • CRT Type: 6-inch rectangular with integral graticule, P31 phosphor
  • Display Area: 8x10 div (1 div = 1 cm)
  • Accelerating Voltage: 2kV
  • Trace Rotation: Electrical, front panel adjustable
  • Cal/Probe Compensation Voltage: 2Vp-p +3% square wave, 1kHz nominal
  • CH2 (Y) Output: 50mV/div (nominal into 50ohms load)
  • Output Impedance: Approximately 5?
  • Frequency Response: 20Hz to 30MHz, -3dB
  • Power Requirement: 100~130VAC or 200-260VAC, 50/60Hz, 50 Watts
  • Dimensions (HxWxD): 5.2in x 12.8in x 15.7in (132x324x398mm)
  • Weight: 18.7lbs (8.5kg)
  • Environment Within Specified Accuracy: +10°C to 350°C, 10% to 80% relative humidity
  • Full Operation: 0°C to 50°C, 10% to 80% relative humidity
  • Storage Temperature: -30°C to 70°C, 10% to 90% relative humidity
  • Function Generator
    • Frequency: 0.5Hz~5MHz in 6 steps, controlled by one push switch
    • Output Waveform: Sine, Square, Triangle (3 Waveforms total)
    • Stability: 0.1% - 15 minutes after power on; 0.2% - 24 hours after power on
    • Limits of Operation: 0degC~40degC, 10 to 80% relative humidity
    • Limits of Operation: -20degC~70degC, 0 to 90% relative humidity
  • Frequency Counter
    • Display: 5 digits, 0.36in Red LED, Display at Hz or kHz unit, auto range
    • Gate Time Auto Select: from 10S to 0.25S. According to the frequency of the input signal Auto select
    • Gate Time Auto Detect: The gate time LED wil FLASH when with input and will OFF without input signal, Auto detect
    • Gate Time Auto Reset: The data will hold 10S Max. After the input signal is stop and then auto reset
    • Resolution: 0.001Hz to 1kHz according to the frequency of the input signal. auto select
    • Max. Counter range: 0.1Hz to 50MHz
    • Accuracy: +0.01% + 1 digit or 1/99999 + 1 digit
    • Time Base: 18.432MHz + 10ppm (23°C ±5°C)
 
<< Start < Prev 1 2 Next > End >>

Page 1 of 2