|
 View larger image
This is an interface board used with XBee/XBee-PRO radios.
|
|
XB24-PDK-INT XBee 802.15.4 (Formerly Series 1) Development Kit w/ 3 XBee and 2 XBee-PRO Modules |
|
The 2.4 GHz XBee 802.15.4 (formerly Series 1) Professional Developers Kit includes everything you need to set up a wireless 802.15.4 network in a matter minutes. The inclusion of both 60mW and 1mW modules allow OEMs and systems integrators to determine the needs for their custom wireless networks. With worldwide agency approvals and advanced networking features, the XBee Professional Developers Kit is the premier 802.15.4 development solution.
The development kit includes:
(1) XBee-PRO 802.15.4 w/ Wire Antenna
(1) XBee-PRO 802.15.4 w/ U.fl Connector
(1) XBee 802.15.4 w/ Wire Antenna
(1) XBee 802.15.4 w/ Chip Antenna
(1) XBee 802.15.4 w/ U.fl Connector
(4) RS-232 Development Boards
(1) USB Development Board
(2) U.fl to RPSMA Adapter Cables
(1) RS-232 serial Cable
(1) USB Cable
(2) 2.4 GHz RPSMA Antennas
(3) 9V Battery Clip
|
|
|
XB24-DKS-INT XBee 802.15.4 (Formerly Series 1) Starter Development Kit w/ 2 XBee Modules |
|
The 2.4 GHz XBee Starter Kit includes everything you need to set-up a wireless 802.15.4 network in a matter of minutes. The 1mW XBee OEM RF Modules make it simple to design and range test custom wireless networks. The XBee Starter Kit includes worldwide agency approvals and advanced networking features.
The development kit includes:
(2) XBee 802.15.4 w/ Wire Antenna
(1) RS-232 Development Board
(1) USB Development Board
(1) RS-232 Serial Cable
(1) USB Cable
(1) 9V Battery Clip
|
|
XBee ZB/ZNet 2.5 Development Kit w/ 2 XBee-PRO modules & 3 regular XBee modules |
|
The 2.4 GHz XBee ZB/ZNet 2.5 (formerly Series 2) Development Kit includes everything you need to set up a wireless ZigBee network in a matter of minutes. Two 50 mW PRO modules and three 1mW regular modules allow OEMs and systems integrators to establish self-discovering/self-healing ZigBee mesh topologies within their custom wireless networks.
The development kit includes:
(1) XBee ZB/ZNet 2.5 w/ Wire Antenna (Coordinator)
(1) XBee ZB/ZNet 2.5 w/ Chip Antenna (Router)
(1) XBee ZB/ZNet 2.5 w/ U.fl Connector (Router)
(2) XBee-PRO ZB/ZNet 2.5 w/ RPSMA Connector (Router)
(3) RS-232 Development Boards
(2) USB Development Boards
(3) 2.4 GHz RPSMA Antenna
(1) U.fl to RPSMA Adapter Cable
(3) RS-232 Serial Cables
(2) USB Cables
(3) 9V Battery Clips
(3) Adapters
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |